The sewage grinder grill is a new type of grid, it pulverizes the solid matter in the sewage into fine particles. After the slag in the sewage is crushed, it does not need to be salvaged and the sewage grinder can also protect the subsequent water pump.
The solid matter in the sewage enters the drum area with the sewage, and the solid matter is intercepted by the rotating water grid (drum) next to it and transported to the cutting chamber, which is pulverized into small particles of 6-10 mm by cutting blade, and pass directly through the drum area and flow away together with other small particles.
The sewage grinder includes cutting blades, gaskets, shafts, vertical rotary water grids, bearings and seals, bases, casings, reducers, and motors.
The shredder blade of sewage grinders is a two-axis design that operates continuously under dry/wet conditions. The cutting blades and shims are single piece separated.
Two independent cutting blades and shims are mounted on two parallel shafts that alternately overlap to achieve a helical cut. The driven shaft is rotated by the driveshaft to rotate at a speed of 2/3 of the drive shaft.
The rotating water drum grid will direct all solid particles into the rotating biaxial crushing blade set. It can prevent the residue from adhering to the drum grid and make the sewage grinder self-cleaning.
Cutting blade and gasket | Heat treated alloy steel |
Axis | Heat treated hexagonal alloy steel |
Base and outer casing | Ductile iron |
Machinery Seal | Tungsten carbide / tungsten carbide |
Rubber parts | Nitrile rubber |
Hub grid | Stainless steel |
Bearing | HRB |
The sewage grinder grill is a new type of grid, it pulverizes the solid matter in the sewage into fine particles. After the slag in the sewage is crushed, it does not need to be salvaged and the sewage grinder can also protect the subsequent water pump.
The solid matter in the sewage enters the drum area with the sewage, and the solid matter is intercepted by the rotating water grid (drum) next to it and transported to the cutting chamber, which is pulverized into small particles of 6-10 mm by cutting blade, and pass directly through the drum area and flow away together with other small particles.
The sewage grinder includes cutting blades, gaskets, shafts, vertical rotary water grids, bearings and seals, bases, casings, reducers, and motors.
The shredder blade of sewage grinders is a two-axis design that operates continuously under dry/wet conditions. The cutting blades and shims are single piece separated.
Two independent cutting blades and shims are mounted on two parallel shafts that alternately overlap to achieve a helical cut. The driven shaft is rotated by the driveshaft to rotate at a speed of 2/3 of the drive shaft.
The rotating water drum grid will direct all solid particles into the rotating biaxial crushing blade set. It can prevent the residue from adhering to the drum grid and make the sewage grinder self-cleaning.
Cutting blade and gasket | Heat treated alloy steel |
Axis | Heat treated hexagonal alloy steel |
Base and outer casing | Ductile iron |
Machinery Seal | Tungsten carbide / tungsten carbide |
Rubber parts | Nitrile rubber |
Hub grid | Stainless steel |
Bearing | HRB |